Home  |  Store  |  Race Team  |  Powder Coating  |  Used  | Cobra  |  DRR  |  Apex  |  Custom Builds  |  Photos  |  Policy

Phone: 812-673-4958       E-mail: heathmxracing@tds.net      Shop online at Heath MX/ATV Racing

 
New Cobra Billet Crank With Billet Rod
Engines with these cranks have dominated the
first round of the 2011 ATVA Nationals. 

Available in popular sizes such as stock 50cc stroke 41.7 mm, stroked for 70 single speed 44.7mm, or destroked to 39.2mm.  Also have custom strokes available to accommodate more custom builds & bore sizes.
Billet Cobra Crank     Billet Cobra Rod Assembly
 
We have been testing this new clutch and found that has many benefits over the stock three shoe clutch and other disc style clutches currently on the market. 

 

2 Disk Racing Clutch for the Cobra 50cc Motorcycle and ATV

Easy to install

100% Billet Material

Smaller diameter than stock for less rotating mass!

Over 12 ounces lighter than stock!
100% more Friction Surface area than Stock!

Fits inside the original case. No need for a spacer!
Adjustable stall speed

$450.00

 

Heath Racing Custom Steering Stabilizer. Price $219.99

Available Models

Honda   TRX 700XX , 450R , 400EX

Yamaha   YFZ 450 , 2009 YFZ 450R , Raptor 700

Kawasaki    KFX 450 , KFX 400, DVX 400

Suzuki  LT-R450 , LTZ 400

KTM   450-525

Cobra ECX Mini Quads 50 - 90

   

Cobra Billet Cylinder Head Kit

Nick named “The Ice Cube”.  This head was developed and designed exclusively by Heath Racing.  There are several benefits to this product.  #1, it allows the engine to run much cooler.  This is especially important at the end of the race, because these engines build heat and as a result, lose power and “fade”.  Three ways this product combats heat: 1) Much bigger water jackets allowing more coolant to carry heat away from where it is generated. 2) Built from a high quality material, billet aluminum, which dissipates heat better than the stock cast aluminum cylinder head. 3) Heat sink engineered into product that pulls heat away from engine which is thus carried away by the air passing by.   

 

We are offering this kit with our custom cylinder head insert that has a specially designed combustion chamber.  Also included are bigger cylinder head studs and higher quality flange head nuts.  This kit is available as a two piece design for the 50, 60, 65, & 70cc engines.  It comes as a one piece design for the 75, 80, & 90cc engines. 

 

Please call for pricing and availability.  We will need your engine for proper fitting on some bore and stroke combinations. 

 

   

Cobra Dellorto Jet Kit

Kit contains 8 Dellorto main jets and 4 Dellorto pilot jets housed in sturdy plastic case.  Available for both the 19 & 21mm Dellorto carburetors.  Kit retails for over $80 if purchased separately.

 

Special price $49.99 – Please specify 19mm or 21mm kit. 

 

Cobra Aluminum Tie Rod Kit

This Tie Rod Kit is stronger, less expensive and over two pounds lighter than the stock Cobra tie rods.

 

Retail $149.99

Cobra Swingarm
Cobra Lightweight Chromoly Swingarm was developed for the racers that couldn't get the reliability out of the stock unit, but didn't want the added weight of the after-market units available.  The NEW version is the lightest yet!  This swingarm is 100% Chromoly and is tig welded.  It is reinforced so it is much stronger than the stock swingarm and also weighs in at over 1.5 lbs lighter than the stock swingarm.  The shock mount is also much sturdier than the stock units stamped steel mount.
 
We are so confident in the quality and workmanship of this product, that we are offering one year free repair or replacement.
 
Retail price on the product is $649.99 bare and $679.99 powder coated

 

Cobra Quick Change Sprocket Hub
Cobra Quick Change Sprocket Hub was designed to make easier changing in rear sprockets on all Cobra quads.  This hub will relocate the sprocket to the front side of the hub so there is no longer any need to remove the hub to change the sprocket.  The hub also has studs installed instead of bolts.  Therefore, all you have to do is remove the four bolts that attached the sprocket to the hub.  It's made out of aircraft grade aluminum so it is both stronger and lighter than the stock Cobra hub.  We also have available split sprockets designed especially for this hub to make changing gears a breeze on the Cobra quads. These come with machined aluminum finish or can be anodized or powdercoated with your choice of color for an additional charge.  This is a Heath Racing exclusive item and you will not find this from Cobra Motor Manufacturing or any other Cobra dealer. 
 
Retail Cost:  $324.99
 
 

Custom number plates

Custom number plates for your bike or quad are available.   Specify name, colors, number, etc. 

Can be ready and sent to you within a few days.  $29.99/each which includes the number plate.

 

Click on image to

take a closer look.

 

AC Racing Nerf Bars

Nerf bars available for most mini quads starting at $219.99.

 

Download the Cobra PDF Catalog or look at it online ...

Call Heath Racing @ 812-673-4958to order your 2009 products!

   

Elka Shocks

A full line of Elka Suspension products are available.  Please call for pricing, to check our current inventory, or to place orders.

 

·    Custom-built for each rider according to individual weight and riding style

·    Individually tested on a dynamometer to ensure quality and performance

·    CNC-machined, aeronautical grade anodized billet aluminum parts and adjustment knobs

·    High-quality triple-seal heads

·    Checkball that isolates the compression adjustment from the rebound

·    Induction-hardened 5/8" shaft

·    Needle-type adjusters for precise incremental adjustment

·    High-quality seals, o-rings and wearbands

·    Blow-off valve that prevents internal damage to the shock absorber from peak forces

·    High-volume reservoirs with floating piston

·    High-tensile proprietary springs

·    Plastic-coated, stainless steel braided hosing for optimal flow, attached with high-quality banjo bolts that prevent restriction

·    High-performance microcellular progressive bottom-out bumpers for a smoother feeling

·    Spherical bearings at both ends that isolate the shock absorber from torsional force

 

 

 

 

ITP Wheels and Tires

We carry quality ITP Wheels. Select from the popular Aluminum C-Series, the Aluminum T-9 Pro Series, or the economical Steel wheels for your Sport or Utility ATV.

 

 

 

JB Cobra Swing Arms

 for ECX50 & 70

Retail $625

 

JB Cobra A-Arms.

  Retail is $625.00

 

Lonestar Racing

Largest Manufacturer of Aftermarket ATV Racing and Performance Parts.  Please call for pricing, to check our current inventory, or to place orders.

 

 

Liquid Performance Products

We stock a full line of Liquid Performance products including: Cycle/ATV Wash, Mud Release, Racing Coolant/Antifreeze, Mini Bike Coolant, Contact Brake Cleaner, Chain Lube, Spray Polish/Cleaner, etc...  To save on shipping cost purchase multiple items at once...  Please call to check our current inventory, pricing, or to place orders. 

 

 

Maier USAQuality Plastic Motorcycle and ATV Accessories.  Maier is the largest manufacturer of custom and O.E.M. type replica ATV and motorcycle replacement fenders in the United States.  All dirt and ATV products are made of shiny polyopylene and may be available in one or more of the following colors:  black, carbon fiber look, dark blue, explosion red, fighting red, green, Mossy Oak camo, neon yellow, olive green, orange, pink, red, silver, Suzuki blue, textured black, white, yellow and zest orange.  Some of the items available are:  fenders, shields, number plates, heat tile kits, air scoops, handguards, guards, skid plates, tank covers, hoods, mud flaps, Rhino parts, handle grips, etc.

NGK and Champion spark plugs

We carry a full line of NGK and Champion spark plugs starting at $3.95/each.

 

 

Our most popular ATV grip. The Rogue Lock-On grips feature large raised pads for better shock absorption and deep grooves to channel away dirt and debris. As part of our Lock-On Grip System™, They also offer easy no-hassle installation and 100% slip free performance.

Product Features:
 
  • Large raised tread pattern provides excellent shock absorption
  • 130mm length / 3/4 flange model
  • Easy installation allows grips to be changed in seconds
  • 100% guaranteed slip-free performance
  • Includes new Snap Cap™ bar ends

 

OMF wheels

OMF offers high-performance wheels as they come from the manufacturers, before they make modifications such as Beadlocks and/or Reinforcement Rings. These high-quality wheels come from the best sources in the business, specifically Douglas and ITP--considered by most to be the major players in the wheel industry. They're available in a mind-boggling variety of sizes, shapes, offsets and bolt patterns for virtually all ATV's and riding applications.

 

 

 

Rath Racing

Rath Racing is the only company to offer a racer designed, built and tested line of products.  They offer a professional quality racing product.  Call today to order your bolt-on Rath Racing Nerf Bars, Bumper, or other products.

Rath Racing Mini Rear Grab Bars

Retail $79.99. 

Available for Cobra, Kymco 90, & Predator 90

 

Rath Racing Mini Nerf Bars.

 

Cobra retail $445.99

DRR retail $ 260.99

 

Rath Racing Mini Bumpers retail $124.99. 

Available for Cobra, DRR, Honda TRX90,

& JB Mod.

 

 

 

 

Rebel Gears

We stock a full line of Rebel Gear products for Cobra, DRR, LEM, Kasea, Honda, and more. . .  We order these products in bulk to save you money. . .  Be sure to save on shipping cost by ordering multiple items at once.  Hundreds of sprocket patterns available.  Please call for more ordering information or to check our current inventory.

 

 

RK Racing Chains

We stock a full line of RK racing chains starting at $24.99.  Please call to check our current inventory or to place orders.

 

Contact Trackside Trackside Performance available for the Cobra 50, 70, 90, CVT’s and modified applications. 

Tusk tether kill switches

We carry kill switches in black, red, blue, and yellow.  These are priced at $29.99/each.

 

 

VP Racing Fuel

We now carry a full line of VP Racing Fuel and accessories.  We currently have C-12, U 4, U 4.2, MS103, & MRX01 in stock in 5 gallon cans.  Please be sure to order early so it is available for that upcoming race. 

 

 

 

 

 

Heath Racing

Phone: 812-673-4958

E-mail: heathmxracing@tds.net

 

Shop online at Heath MX/ATV Racing

Home | Contact Us | Race Team | Powder Coating | Used Product | Parts & Accessories | Feedback | Cobra | DRR | Apex | Custom Builds